Xi'an Kacise Optronics Co.,Ltd.
Kacise, understanding your automation needs.
Add to Cart
Online Dust Concentration Tester KGD-OPM-212
Product Introduction
The KGD-OPM-212 Online Dust Concentration Tester adopts the principle of optical scattering. It can accurately detect and calculate the number of suspended particulate matters of different particle sizes in the air per unit volume. It is equipped with KACISE's brand-new intelligent dust source identification technology and combined with an air pump with a stable flow rate, enabling the real-time detection and output of the mass concentrations of particulate matters PM1.0, PM2.5, PM10, and TSP.
Product Features
Technical Parameters
| Detection Range | 0~30mg/m³ |
| Measurement Accuracy of PM1.0 and PM2.5 | ≤100μg/m³: ±10μg/m³; 100~1000μg/m³: ±10% of the reading |
| Measurement Accuracy of PM10 | ≤100μg/m³: ±15μg/m³; 100~1000μg/m³: ±15% of the reading |
| Measurement Accuracy of TSP | ≤100μg/m³: ±20μg/m³; 100~1000μg/m³: ±20% of the reading (Using the traceability system benchmarked with Wuhan National Station. If there are differences in the measured values in other regions, the coefficient calibration is required according to the local distribution of dust particulate matters) |
| Power-on Stabilization Time | ≤8 seconds |
| Data Refresh Frequency | 1 second |
| Operating Conditions | -30℃ to 70℃; 0 to 95% Relative Humidity (RH) (non-condensing) |
| Storage Conditions | -40℃ to 85℃, 0 to 95% Relative Humidity (RH) (non-condensing) |
| Operating Voltage | DC 12V |
| Average Operating Current | ≤4.5A |
| Communication Interface | RS485 interface |
| Sampling Flow Rate | 1L/min (Default flow rate, which can be customized by customers) |