Xi'an Kacise Optronics Co.,Ltd.
Kacise, understanding your automation needs.
Add to Cart
Smoke Sensor KGD-ATRS-205
Product Introduction
The Smoke Sensor Module KGD-ATRS-205 can effectively monitor the indicators such as the dust concentration and temperature released before the battery thermal runaway is triggered, and transmit the measurement signals to the BMS through CAN communication. This solution has remarkable features such as accurate measurement, fast response time, low cross-interference, low power consumption, long service life and high reliability.
Product Features
Technical Parameters
| Detection Types | Particulate Matter (PM), Temperature (T) |
| Detection Range | PM: 1-10000ug/m³ T: -40℃~85℃ |
| Resolution | PM: 1ug/m³ T: 0.1℃ |
| Detection Accuracy | PM: ±15ug/m³ @≤100ug/m³, ±15% of the reading @＞100ug/m³ (TSI8530 standard source, 8mg cigarette, cigarette injection speed 1L/min) Temperature T: ±2℃ |
| Data Refresh | ≤1s |
| Output Mode | CAN2.0 |
| Design Life | 10 years |
| Operating Conditions | -40℃~+85℃; 0~99%RH (non-condensing) |
| Storage Conditions | -40℃~+95℃; 0~99%RH (non-condensing) |
| Operating Pressure | 60kPa~120kPa |
| Power Supply Voltage | 6~16VDC, standard voltage +12VDC |
| Average Operating Current | Normal working mode: ≤30mA, @+12VDC (the sensor works continuously) Low-power mode: ≤500uA, @+12VDC (the sensor works intermittently and detects once every 12.2s) Deep sleep mode: ≤50uA, @+12VDC (the sensor enters deep sleep and stops working, and needs to be awakened and triggered by an external signal) |
| Static Current | ≤100uA, deep sleep (stop) mode ≤500uA, low-power mode |