Xi'an Kacise Optronics Co.,Ltd.
Kacise, understanding your automation needs.
Add to Cart
Laser Dust Sensor KGD - PM - 117
Product Introduction
The laser dust sensor KGD - PM - 117 is a laser dust sensor with the same installation size and interface as the PM1003 infrared dust sensor. It is used to measure the mass concentration of PM2.5 particulate matter in indoor air. The client can achieve a perfect upgrade from grade display to digital display without adjusting the structure and hardware.
Product Features
Technical Parameters
| Detection Range | 0 - 1000μg/m³ |
| Data Output | PM1.0, PM2.5, PM10 |
| Power-on Stabilization Time | ≤8s |
| Data Refresh Frequency | 1s |
| Detection Accuracy | ±15μg/m³ or ±15% of the reading (Under the environmental conditions of 25℃±2℃, 50±10%RH, benchmarked against TSI8530) |
| Operating Conditions | -10°C to 50°C, 5 - 95%RH |
| Storage Conditions | -30°C to 60°C, 0 - 95%RH (non-condensing) |
| Operating Voltage | DC 5.0V±0.1V; with a ripple < 50mV |
| Operating Current | ≤100mA |
| Standby Current | <20mA |
| Signal Output | ① UART_TTL(3.3V) ② PWM(Default 5V, 3.3V reserved) |
| Product Dimensions | W58.7H45D13.9(mm) |