Xi'an Kacise Optronics Co.,Ltd.
Kacise, understanding your automation needs.
Add to Cart
KAN141 Intelligent Composite Flame Detector
Product Introduction
The shell is made of a thickened explosion - proof sapphire panel. The sensitivity of this detector is adjustable. It has a passive output and can be connected to a fire alarm system. The flame detection distance can reach up to 50 meters; the infrared detection viewing angle is 90°, and the ultraviolet detection viewing angle is 120°. The detector is a composite red - ultraviolet flame detection device that can collect radiation information from light sources in different wavelength bands, which can greatly enhance the stability of the detector.
Product Description
| Operating Voltage and Pressure Range | Electrical Interface and Sensitivity Level | Sensor Lifespan and Shell Material | Detection Distance |
| DC24V±6V, 86KPa - 106KPa | G1/2" internal thread, Class I | 3 years (typical value), explosion - proof sapphire glass | 25m (0.33m×0.33m ethanol fire, normal heptane fire) ≤60m (0.5m×0.5m gasoline fire) |
| Viewing Angle Range and Response Time | Explosion - proof Mark and Protection Level | LED Indication | Spectral Response |
| Infrared 90°, Ultraviolet 120°, <30S | Ex d IIC T6 Gb : Ex tD A21 IP66 T80°C IP66 | Operating indication: green light flashing Alarm indication: red light always on Fault indication: yellow light always on | Ultraviolet tube: 185nm - 260nm Infrared tube: 4.3μm - 5.1μm |
| Signal Output and Operation Mode | Operating Temperature and Humidity | Fire Alarm Relay | Fault Relay |
| Relay passive, infrared adjustable | -10°C - +55°C, 0 - 95%RH (non - condensing) | 1A/30VDC 0.3A/60VDC 0.5A/125AC | 1A/30VDC 0.3A/60VDC 0.5A/125AC |