Xi'an Kacise Optronics Co.,Ltd.
Kacise, understanding your automation needs.
Add to Cart
KAN103 Point-type Combustible Gas Detector for Industrial and Commercial Use
Product Introduction
The detector is compatible with various types of gas sensors, including catalytic, infrared, semiconductor, and electrochemical sensors. The housing is designed with a thickened explosion-proof aluminum alloy, ensuring long-term and stable operation in all kinds of industrial explosion-proof environments.
It is an all-round detector that allows for switching between 2/3/4-wire systems, RS485, and LoRa communication by replacing plug-and-play modules. The detector comes with a switch output (passive relay output). You can adjust the output setting to follow a specific mode through parameter configuration. Additionally, it is equipped with a drive output for an audible and visual alarm (24V DC).
Product Description
| Operating Voltage and Power Consumption | Detection Range | Detection Principle | Communication Distance |
| DC24V ± 6V, ≤ 1.5W (DC24V) | Diffusion type | Catalytic combustion, Electrochemical, Infrared, PID | ≤ 1000m (RVSP1.5mm²) |
| Electrical Interface | Explosion - proof Mark and Protection Level | Output Capacity | Communication and Operation Modes |
| G3/4" internal thread | Ex db IIC T6 Gb : Ex db IIIC T80°C Db IP66 | 1 set of passive switch output: 220VAC/24VDC, 2A 1 set of active audible and visual alarm output | Infrared remote control within ≤ 8 meters 4 - 20mA three - wire communication, ABUS four - wire system TBUS two - wire system, RS485, LoRa communication |
| Alarm Value | Operating Temperature and Humidity | Display Method | Pressure Range and Response Time |
| Specific parameters of different sensors are shown on the nameplate | -40°C - +70°C, ≤ 93%RH | Three - light status display | 86KPa - 106KPa < 30S (T90) |