Xi'an Kacise Optronics Co.,Ltd.
Kacise, understanding your automation needs.
Add to Cart
Turbine flow meters with a pressure bearing capacity of 2.5 to 6.3 Mpa
Introduction
The Turbine Flow Meters with a pressure bearing capacity of 2.5 to 6.3 Mpa are remarkable instruments. They are designed to measure fluid flow under high pressure conditions. These meters employ advanced turbine technology, where the turbine rotates as fluid passes through, and the rotation is converted into electrical signals for accurate flow rate determination. Their robust construction enables them to withstand pressures ranging from 2.5 to 6.3 Mpa, ensuring reliable performance. Ideal for industries like oil and gas, chemical, and power generation, they provide precise flow data, facilitating efficient operations and enhancing safety in high-pressure systems.
Technical Specifications
| Pipe Size (DN)mm | Flow Range(m3/h) | Nominal pressure (Mpa) | ||
| 0.2% | 0.5% | 1.0% | ||
| 4 | 0.04-0.25 | 6.3 | ||
| 6 | 0.1-0.6 | 6.3 | ||
| 10 | 0.2-1.2 | 6.3 | ||
| 15 | 1.2～4 | 0.6～6 | 0.4～6 | 2.5 6.3 16 |
| 20 | 2～6 | 0.8～8 | 0.6～8 | |
| 25 | 3～10 | 1.2～12 | 1.2～12 | |
| 32 | 4～12 | 1.5～15 | 1～20 | |
| 40 | 8～25 | 3～30 | 3～30 | |
| 50 | 12～40 | 5～50 | 5～50 | 6.3 2.5 |
| 65 | 15～60 | 7～70 | 5～70 | |
| 80 | 20～100 | 16～100 | 12～120 | |
| 100 | 50～160 | 25～160 | 20～200 | |
| 125 | 50～200 | 30～250 | 25～280 | |
| 150 | 100～300 | 50～300 | 40～400 | |
| 200 | 200～600 | 100～600 | 80～800 | |
| 250 | 300～1000 | 160～1000 | 120～1200 | 2.5 |
| 300 | 250～1600 | |||
| 400 | 400～2500 | |||
| 500 | 600～4000 | |||
| Ambient Temperature | -20～+55℃ |
| Relative Temperature | 5%～95% |
| Atmospheric Pressure | 86～106Kpa |
| Ordinary Type Medium Temperature | -20～+120℃ |
| Explosion-Proof Type Medium Temperature | -20～70℃ |
| Explosion Proof | dⅡBT5 |
| Power Supply | Two wire: +24VDC Three wire:+12VDC～＋24VDC |
| Connection | Thread or Flange |
Dimensions
Thread Connection
Flange Connection
| Pipe Size DN (mm) | Sensor Dimension (mm) | Flange Dimension (mm) | thread size | ||||||
| L | H | D | D1 | D2 | D3 | n-do | L1(mm) | G | |
| 4 | 225 | 145 | 1/2 | ||||||
| 6 | 225 | 145 | 1/2 | ||||||
| 10 | 345 | 170 | 1/2 | ||||||
| 15 | 75 | 190 | 95 | 65 | 45 | 4-14 | 23 | 1 | |
| 20 | 85 | 210 | 105 | 75 | 55 | 4-14 | 23 | 1 | |
| 25 | 100 | 230 | 115 | 85 | 65 | 4-14 | 30 | 11/4 | |
| 32 | 120 | 250 | 140/135 | 100 | 78 | 4-18 | 30 | 11/4 | |
| 40 | 140 | 260 | 150/145 | 110 | 85 | 4-18 | 35 | 2 | |
| 50 | 150 | 270 | 165/160 | 125 | 100 | 4-18 | |||
| 65 | 150 | 290 | 185/180 | 145 | 125 | 4-18 | |||
| 80 | 200 | 300 | 200/195 | 160 | 135 | 8-18 | |||
| 100 | 220 | 330 | 220/215 | 180 | 155 | 8-18 | |||
| 125 | 250 | 380 | 250/245 | 210 | 185 | 8-18 | |||
| 150 | 300 | 390 | 285/280 | 240 | 210 | 8-23 | |||
| 200 | 360 | 455 | 340/335 | 295 | 265 | 12-23 | |||
| 250 | 400 | 510 | 405 | 355 | 320 | 12-26/25 | |||
| 300 | 420 | 565 | 460 | 410 | 375 | 12-26/25 | |||
| 400 | 560 | 680 | 580 | 525 | 485 | 16-30 | |||
| 500 | 600 | 790 | 715/705 | 650 | 608 | 20-34 | |||