Xi'an Kacise Optronics Co.,Ltd.
Kacise, understanding your automation needs.
Add to Cart
Turbine Flow Meters with DN4 to DN500
Introduction
The Turbine Flow Meters with DN4 to DN500 are outstanding in fluid measurement. They cover a wide diameter range, from DN4 to DN500, making them suitable for diverse industrial applications. These meters operate by using a turbine rotor that rotates at a speed proportional to the fluid flow. As the fluid passes through, sensors detect the turbine's motion and convert it into electrical signals. This enables accurate measurement and monitoring of flow rates. They offer high precision, durability, and easy installation. Ideal for sectors like water supply, chemical, and oil industries, they ensure reliable and efficient flow management, contributing to process optimization and cost savings.
Technical Specifications
| Ambient Temperature | -20～+55℃ |
| Relative Temperature | 5%～95% |
| Atmospheric Pressure | 86～106Kpa |
| Ordinary Type Medium Temperature | -20～+120℃ |
| Explosion-Proof Type Medium Temperature | -20～70℃ |
| Explosion Proof | dⅡBT5 |
| Power Supply | Two wire: +24VDC Three wire:+12VDC～＋24VDC |
| Connection | Thread or Flange |
| Pipe Size (DN)mm | Flow Range(m3/h) | Nominal pressure (Mpa) | ||
| 0.2% | 0.5% | 1.0% | ||
| 4 | 0.04-0.25 | 6.3 | ||
| 6 | 0.1-0.6 | 6.3 | ||
| 10 | 0.2-1.2 | 6.3 | ||
| 15 | 1.2～4 | 0.6～6 | 0.4～6 | 2.5 6.3 16 |
| 20 | 2～6 | 0.8～8 | 0.6～8 | |
| 25 | 3～10 | 1.2～12 | 1.2～12 | |
| 32 | 4～12 | 1.5～15 | 1～20 | |
| 40 | 8～25 | 3～30 | 3～30 | |
| 50 | 12～40 | 5～50 | 5～50 | 6.3 2.5 |
| 65 | 15～60 | 7～70 | 5～70 | |
| 80 | 20～100 | 16～100 | 12～120 | |
| 100 | 50～160 | 25～160 | 20～200 | |
| 125 | 50～200 | 30～250 | 25～280 | |
| 150 | 100～300 | 50～300 | 40～400 | |
| 200 | 200～600 | 100～600 | 80～800 | |
| 250 | 300～1000 | 160～1000 | 120～1200 | 2.5 |
| 300 | 250～1600 | |||
| 400 | 400～2500 | |||
| 500 | 600～4000 | |||
Dimensions
Thread Connection
Flange Connection
| Pipe Size DN (mm) | Sensor Dimension (mm) | Flange Dimension (mm) | thread size | ||||||
| L | H | D | D1 | D2 | D3 | n-do | L1(mm) | G | |
| 4 | 225 | 145 | 1/2 | ||||||
| 6 | 225 | 145 | 1/2 | ||||||
| 10 | 345 | 170 | 1/2 | ||||||
| 15 | 75 | 190 | 95 | 65 | 45 | 4-14 | 23 | 1 | |
| 20 | 85 | 210 | 105 | 75 | 55 | 4-14 | 23 | 1 | |
| 25 | 100 | 230 | 115 | 85 | 65 | 4-14 | 30 | 11/4 | |
| 32 | 120 | 250 | 140/135 | 100 | 78 | 4-18 | 30 | 11/4 | |
| 40 | 140 | 260 | 150/145 | 110 | 85 | 4-18 | 35 | 2 | |
| 50 | 150 | 270 | 165/160 | 125 | 100 | 4-18 | |||
| 65 | 150 | 290 | 185/180 | 145 | 125 | 4-18 | |||
| 80 | 200 | 300 | 200/195 | 160 | 135 | 8-18 | |||
| 100 | 220 | 330 | 220/215 | 180 | 155 | 8-18 | |||
| 125 | 250 | 380 | 250/245 | 210 | 185 | 8-18 | |||
| 150 | 300 | 390 | 285/280 | 240 | 210 | 8-23 | |||
| 200 | 360 | 455 | 340/335 | 295 | 265 | 12-23 | |||
| 250 | 400 | 510 | 405 | 355 | 320 | 12-26/25 | |||
| 300 | 420 | 565 | 460 | 410 | 375 | 12-26/25 | |||
| 400 | 560 | 680 | 580 | 525 | 485 | 16-30 | |||
| 500 | 600 | 790 | 715/705 | 650 | 608 | 20-34 | |||