Dissolved Oxygen Sensor For Shrimp Farm And Pond Dissolved Oxygen Sensor
Introduction
The Kacise KWS-630 fluorescence dissolved oxygen sensor is designed for the aquaculture industry. It has the characteristics of stable online monitoring, and it has excellent characteristics compared with the traditional type sensor. It has no membrane, no need electrolyte, strong anti-interference, no need for frequent calibration, no consumption of oxygen, no flow rate limitation, auto matic temperature and Gas pressure compensation, gast reaction speed, long service life and more economical and convenient, so the fluorescence dissolved oxygen sensor is the best choice for real-time dynamic monitoring of oxygen content in aquaculture.
Features
- No membrane, no need electrolyte
- Small annual drift, fast response, and more accurate measurement
- Free of maintenance, longer application cycle and lower cost of use
- Fluor cap replacement is simple
- Support RS-485, MODBUS protocol
- No need to consume oxygen, not affected by flow rate
- Built-in temperature sensor, automatic temperature compensation
- Free from chemical interferences such as sulfides
Technical Specifications
| Range |
0-20mg/L or 0-200% saturation |
| Accuracy |
±5% |
| Response Time |
3 min |
| Ip Grade |
IP68 |
| Sensor Drift |
<1% per year |
| Operating Temperature |
0~50℃ |
| Temperature Accuracy |
Temperature Accuracy |
| Output |
RS485, Modbus |
| Power Supply |
DC6-12V ±5%, current<50mA |
| Temperature Sensor |
NTC |
| Casing Diameter |
22mm |
| Casing Length |
188.3mm |
| Cable Length |
Standard 10m, customizable 5m, 15m and 30m |
| Fluorescent Cap Lifetime |
1 year (under normal use) |
| Casing Material |
POM |
